Skip to content

Pro-Ject T1 Phono SB Turntable

10 Reviews
Save $80.00 Save $80.00
Original price $799.00
Original price $799.00 - Original price $799.00
Original price $799.00
Current price $719.00
$719.00 - $719.00
Current price $719.00

Pro-Ject T1 Phono SB Turntable

Need bluetooth? Add an optional adapter for an additional $89 to create a bluetooth turntable.  

New Generation Audiophile Entry Level Turntable

Built-in Phono Stage & Electronic Speed Switch – Made in Europe 

The stylish CNC-machined plinth of the T1 features no plastic parts and is carefully manufactured to ensure there are no hollow spaces inside, therefore avoiding unwanted vibrations within the chassis. Carrying this philosophy through the design, the glass platter is also a heavy, zero-resonance design. Finally, the purpose-chosen turntable feet also do a good job of isolating the T1 from ambient vibrations around your hi-fi system. In the T1 the motor drives a belt-system, attached to a newly designed sub-platter, which is mounted into an ultra-precise 0.001mm main bearing with a hardened steel axle and brass bushing. The tonearm new tonearm has an effective length of 8.6”. This one-piece aluminium tonearm also features low-friction bearings for absolute accuracy in use. The T1 comes with a pre-adjusted Ortofon OM 5E Moving Magnet cartridge and is ready to use right out of the box. Also super shielded, semi-symmetrical, low-capacitance Pro-Ject phono cables are included.

Compared to the base T1-model, the Phono SB version includes a built-in, Pro-Ject designed, high-quality phono MM stage and an electronic speed switch between 33 and 45 RPM. For the drive system, where most alternative products may use unregulated DC motors with wide speed fluctuations, the T1 Phono SB features our proven system of an electronically regulated, precision-speed AC motor.

pro-ject t1 phono sb turntable melbourne hi fi1

    Key Features

    Glass Platter

    pro-ject t1 phono sb turntable melbourne hi fi2

    The Pro-Ject T1 Phono SB is supplied with a heavy, low-resonance glass platter. A significant upgrade from plastic or lightweight steel alternatives, this new platter both looks stylish & provides the consistent speed that your vinyl needs to sound its best.

    Sub-Platter Motor

    pro-ject t1 phono sb turntable melbourne hi fi3

    In the T1 the motor drives a flat belt-system, attached to a newly designed sub-platter, which is mounted into an ultra-precise 0.001mm main bearing with a hardened steel axle and brass bushing. Resulting in reduced feedback from the bearing when compared to other turntables, and also the added advantage of not having to fiddle with the belt once it's in place! 

    Electronic Speed Control

    To make it as easy as possible for customers to get started with the Pro-Ject T1 Phono SB an electronic speed control is integrated into the turntable - activated with a simple switch on the front-left of the plinth. This allows easy switching between the two most common speed formats, 33 and 45 RPM. 

    Switchable phono stage on-board

    The Pro-Ject T1 Phono SB also includes an on-board switchable moving magnet phono stage. This means that the turntable is ready-to-go out of the box, but also has the flexibility for the customer to upgrade their phono stage in the future. This could be a separate phonostage, or an in-built phono in their existing amplifier.

    Cartridge & Tonearm

    pro-ject t1 phono sb turntable melbourne hi fi4

    The Pro-Ject T1 Phono SB has a straight, 8.6” tonearm with a stiff aluminium construction. This one-piece tonearm also features low-friction bearings for absolute accuracy in use. Besides the clean and stylish looks, the integrated headshell won‘t cause any additional vibrations either, a big upgrade from common screwed or glued-on headshells you normally see in turntables at this price point.

    The Pro-Ject T1 Phono SB comes pre-fitted with an Ortofon OM5e Moving Magnet cartridge, which features an elliptical diamond stylus tip for accurate playback and a pre-weighted counter weight. Meaning it is ready to play, straight out of the box! No adjustments, no need to balance the tonearm. 

    Plinth & Finish

    The plinth supporting the Pro-Ject T1 Phono SB is created using precision CNC routing, meaning there are no hollow spaces, as well as no plastic pieces, commonly found in entry-level turntables, resulting in avoidance of unwanted vibrations. The turntable is available in a stylish Piano Black finish, White and Walnut.

    pro-ject t1 phono sb turntable melbourne hi fi6

      In the box:

      • T1 Phono SB with Ortofon OM 5E cartridge
      • Connect it E Phono Cable
      • Felt mat
      • Dust cover
      • Adapter for 7“ singles
      • Power supply
      • Allen key, stylus pressure gauge 
      Specifications 
      Speed 33,45 (electronic speed change)
      Principle Belt drive
      Speed variance 33: 0.7% 45: 0.6%
      Wow & Flutter 33: 0.25% 45: 0.23%
      Platter Heavy 8mm, blasted-glass platter with felt mat
      Main bearing Stainless steel/brass
      Signal to noise 65dB
      Tonearm 8.6” aluminium
      Effective arm length 218.5 mm
      Overhang 22.0 mm
      Effective tonearm mass 8.0 g
      Counterweight for mass 5 - 10g (pre-mounted)
      Tracking force range 0 - 50mN (17.5 mN pre-adjusted)
      Outputs RCA Phono/Line (switchable)
      Included accessories dustcover, feltmat, high quality Connect it E RCA Phono cable
      Built-in Power Supply 110 - 240V/50, 60Hz; 15 V DC 800mA
      Power consumption 4.5 Watt max
      Dimensions 415x100x335 mm (WxHxD)
      Weight 3.8 kg net


      Compare products

      {"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

      Select first item to compare

      Select second item to compare

      Select third item to compare

      Compare