Ayon Audio Crossfire PA Power Amplifier

0 Reviews

Ayon Audio


Type: Amplifiers

Ayon Audio Crossfire PA Power Amplifier

Features & Design

Full-featured single-ended tube stereo integrated amp or pure power amplifier SE – pure Class-A triode vacuum tube-circuit design AA62B Power output tubes high peak current & high voltage delivery Ideal also for more difficult loudspeaker loads

Vacuum Tubes

The choice of signal and power tubes have a significant influence on the sound, and hence, on the inspiration and joy of listening. This is not only the difference between good and bad tubes, but the interaction of the different types of tubes and their combination, that are used in the various Ayon amplifiers. Today only a few manufacturers still produce tubes for pure audio amplification; one of them is Ayon Audio with its outstanding single-ended triode power tubes (AA32B-S, AA52B-S and AA62B) based on the WE 300B.

Signal Path

We believe that the simplest circuits work best together with the shortest signal path. That is why our SE-Triode amplifiers to date have used single-ended pure class A circuitry. The shorter the signal path is, the less possibility of sonic degradation from various sources, including the wire itself. Even on the circuit boards, the copper traces are kept to a very minimum length. The completely redesigned circuit board provides a more straightforward and direct approach to the signal paths.

Power Supply

Single ended amps are more susceptible to power supply aberrations than push-pull amplifiers. The power supplies have been further refined with new components and enhanced AC line noise filtration. Separate power transformers, chokes and filters provide total isolation between the input and output stage which makes this a pure power source and it is a critical attribute for a single-ended amplifier. We also use electrolytic capacitors with much larger storage capacity to make up for the loss in filtering when using resistors in lieu of inductors.

Dual Grounding System

The modification of the grounding topology leads to increased rejection of noise from the power supply and other areas. The dual grounding topology used in all of our amplifiers is quite unique to the whole hi-end tube amplification industry. Such extensive topology provides for quieter backdrop for which the music can unfold in its entirety. It further establishes the quick and controlled bass response and the full bodied expression of the high frequency. The ground leg of the signal has not been neglected and has been given meticulous attention in its implementation. The importance of proper grounding cannot be over emphasized.

Output Transformer

The super-wide bandwidth output transformer’s major strength is that it can deliver the current in the bass, while at the same time maintaining the speed in the high frequencies This dramatically improves the square wave response of the amplifier. The effect is a much more natural and relaxed sound with much better clarity, resolution and fluidity.

Mechanical Construction

The high grade aluminium chassis impart a richer, more lustrous tonality with a cleaner background and less hash and grain. All brushed anodized anti-vibration-resonance and non-magnetic chassis’s are fully hand assembled to insure the highest level of craftsmanship.


Amplifier Ayon Crossfire III
Class of Operation Single-Ended, Pure Class-A
Tube Complement 2 x AA62B
Load Impedance 4 & 8 Ohms
Output Power 2 x 30 Watt
Frequency Response 8 Hz – 35 kHz/ 0 dB
Input Impedance at 1 kHz 100 KΩ
S/N ratio at full power 98 dB
NFB 0dB
Volume Control None Stereo Amp
Remote Control No
Inputs & Output 3xLine In, 1x XLR In, 1xDirect In, 1x Pre  out
Dimensions (WxDxH) cm 52x42x25 cm
Weight 45 kg
Shipping weight 55 kg

Specifications subject to change without notice

0 Reviews



Related Items