Skip to content
NAD | C338 Integrated Amplifier | Melbourne Hi Fi1

NAD C338 Integrated Amplifier

by NAD
2 Reviews
$1,299.00 - $1,299.00
$1,299.00
$1,299.00
$1,299.00 - $1,299.00
$1,299.00

NAD C338 Integrated Amplifier

The C 338 adds big sound to your favourite music sources and brings incredible flexibility to any stereo system. The first-ever hi-fi amplifier to have Chromecast built-in, the C 338 allows you to stream and cast music directly from a mobile device or any music streaming app, letting you enjoy your music wirelessly. With Bluetooth® also natively integrated, the C 338 can wirelessly connect to any smartphone, tablet, or Bluetooth-enabled device within range so you seamlessly stream your favourite music apps or libraries in high-fidelity. Add a turntable using the phono input and experience the warmth of vinyl collections with the room-filling sound of NAD’s Hybrid Digital™ amp technology. Power, volume, source selection, and device settings are all controlled using the intuitive interface of the NAD Remote App for iOS and Android.

nad c338 integrated amplifier melbourne hi fi


Getting the Basics Right

Built with NAD’s renowned music-first approach to audio architecture and amp design, the C 338 is equipped with the most advanced components commonly found in NAD’s class-leading line of amplifiers. Always starting with the details you can hear and advancing from there, NAD develops low-noise circuitry with the precision and stability to deliver incredible, near-zero distortion sound for the most difficult speakers.

HybridDigital™ Amp Technology

The search for a high-performance Class D solution led NAD to HybridDigital™, an innovative amplifier technology that uses a variable modulation frequency to bring out the life-like qualities of music, while reducing distortion under every operating condition. This highly optimized design gives phenomenal performance to the C 338 amplifier, both measured and subjective.

Efficient Class D Power

NAD has worked tirelessly to create the best performing Class D amplifiers that are energy efficient and produce beautiful sound—not heat—regardless of basic design principles. Using advanced measurements and data, NAD developed the C 338’s highly efficient power supply with a customised Hypex® UCD output stage to pump out 50 watts continuously and over 200 watts instantaneously to meet the demands of the most dynamic music. This new design is very linear over a wide bandwidth and provides consistent, noise-free performance for the amplifying stages with near perfect regulation of voltage.

Always Ready for Streaming

The C 338 has Chromecast built-in so you can cast music, tunes, podcasts, and playlists from your favourite apps on your phone, tablet or laptop to your stereo system. Spotify Connect® lets you discover millions of songs and stream them directly to your C 338 using the Spotify® app for a rich, wireless music experience. With the added flexibility of Bluetooth®, your music streaming possibilities are truly limitless with the C 338.

    nad c338 integrated amplifier melbourne hi fi
    Specifications

    Line In, Subwoofer Out

    • THD (20Hz-20kHz)
    • <0.005% at 2V out
    • Signal/Noise Ratio
    • >106dB (IHF; A-weighted, 500mV out, unity gain)
    • Input Impedance (R and C)
    • 56 kilohm + 100pF
    • Maximum Input Signal
    • >4.5Vrms (ref. 0.1% THD)
    • Output Impedance
    • Source Z + 200 Ohm
    • Input Sensitivity
    • 50mV (100Hz ref. 500mV out, Volume maximum
    • Maximum voltage output – IHF load
    • >4.5V (ref. 0.1% THD)

    Line In, Headphone Out

    • THD (20Hz-20kHz)
    • <0.005% at 1V out
    • Signal/Noise Ratio
    • >105dB (IHF; A-weighted, 32 Ohm loads, ref. 2V out, unity gain)
    • Frequency Response
    • ±0.3dB (20Hz-20kHz)
    • Channel Separation
    • >56dB at 1kHz
    • Output Impedance
    • 0.5 Ohm

    General Specifications

    Line In, Speaker Out

    • Continuous Output Power into 4 Ohms and 8 Ohms (Stereo)
    • >50W (at rated THD, 20-20kHz, both channels driven)
    • IHF Dynamic Power
    • 8 Ohm 80W
      4 Ohm 150W
      2 Ohm 210W
    • THD (20Hz-20kHz)
    • <0.03% (250mW to 50W, 8 Ohm and 4 Ohm
    • Signal/Noise Ratio
    • >98dB (A-weighted, 500mV input ref. 1W out in 8 Ohm)
    • Clipping power
    • >60W (at 1kHz 0.1% THD)
    • Peak output current
    • >18A (in 1 Ohm, 1 ms)
    • Damping Factor
    • >300 (ref. 8 Ohm, 20Hz to 6.5kHz)
    • Frequency Response
    • ±0.3 dB (20Hz-20kHz)
    • Channel Separation
    • 1kHz >75dB
      10kHz >65dB
    • Input Sensitivity (For 50W in 8 Ohm)
    • Line In: 380mV, Digital In: 18% FS
    • Sample Rate
    • Up to 24 bit/192kHz

    Phono In, Speaker Out

    • THD (20Hz-20kHz) (Stereo)
    • <0.3% at 50W out
    • Signal/Noise Ratio
    • >82dB (200 Ohm source, A-weighted, ref. 500mV out)
      >76dB (MM cartridge source, IHF A-weighted, ref. 500mV out)
    • Input Sensitivity
    • 4.1mV (ref. 50W 1kHz 4 Ohm out, Volume maximum)
    • Frequency Response
    • ±0.3dB (20Hz-20kHz)
    • Input Impedance
    • 47 kilohm + 100pF
    • Maximum Input Signal
    • >80mVrms (ref. 0.1% THD)

    Power Consumption

    • at ECO Standby mode
    • 0.4 Watts
    • at Control Standby mode
    • 1.8 Watts
    • OFF mode (Power switched OFF)
    • 0 Watts

    Weight & Dimensions

    • Gross Dimensions (W x H x D)*
    • 435 x 70 x 285mm (17 1/8 x 2 13/16 x 11 1/4)”
    • Net Weight
    • 4.85kg (10.7lb)
    • Shipping Weight
    • 5.85kg (12.9lb)

    Compare products

    {"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

    Select first item to compare

    Select second item to compare

    Select third item to compare

    Compare