(03) 9230 2000
(03) 9230 2000
The W12 is the mid-sized model within the Anthra subwoofer series. It features a 12” (30 cm) Rigid Surface Technology II (RST II) C-CAM high-excursion driver powered by a Class-D 1,000 Watt amplifier, housed within a comprehensively internally braced, sealed-box cabinet.
Engineered to deliver impressive bass in medium and large spaces, the Anthra W12 subwoofer features a formidable 1,000 Watt Class-D amplifier driving a 12” (30 cm) Rigid Surface Technology II (RST II) C-CAM high-excursion driver. The W12 can be used on its own or linked with up to three other Anthra subwoofers for a truly immersive, ultra-dynamic listening experience.
A full-colour LCD display and rotatory dial is located on the back panel, to allow for basic subwoofer setup and EQ preset selection, while advanced features including DSP configuration and multi-sub connectivity setup are available via the MaestroUnite app.
Key Features
Specifications
System Format: Active - Sealed Cabinet
Drive Unit Complement: 1x 12" (305 mm) High Linear-Excusion Triple Suspension Driver
Amplifier Classification: High-Efficiency Class-D
Lower Frequency Limit: -6dB @16Hz
Upper Frequency Limit: (LPF Off) -6dB @400Hz
Driver Excursion (pk-pk): 50 mm
DSP: 28 Bit 50 MIPS Configuratable through MaestroUnite
Analogue Digital Conversion: Autoranging Input which combines a 10Vrms maximum input with low signal to noise for small signals
Amplifier Output Power, 240Vac: Instantaneous: 1700 W*, Continuous short-term: 900 W**
Amplifier Output Power, 120Vac: Instantaneous: 1325 W, Continuous short-term: 700 W
LED UI Control: Brightness, On-Off
Phase Control: 0-360 Degrees measured at LPF Crossover
Low Pass Filter: 20-200Hz LPF with Roll off Adjustable from -3 to -48dB/Oct
Custom EQ: Configurable through MaestroUnite;3 pre-defined EQ curves plus 3 custom EQ curves each with 8 band custom EQ supporting (Peaking, High Shelf, Low Shelf, High Pass)
Volume Level: Wide adjustable input gain to allow maximum output from a wide range of input signals
Inputs: Stereo Unbalanced RCA (or mono/LFE using only connector marked LFE)Mono/LFE Balanced XLR
Outputs: Stereo unbalanced outputs with unbuffered throughput from RCA Inputs
Mono/LFE Balanced XLR outputs with unbuffered throughput from XLR Input
Mains Input Voltage: Universal Mains, 85-265VAC
External Dimensions (without feet) (HxWxD): 374 x 374 x 374 mm
Power Consumption: 200 W
Cabinet Construction: Braced 25 mm thick MDF with 36mm front baffle
Grille: Cloth covered magnetically attached Grilles
Weight: 32.4 kg
{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}